Exhaust Hanger Rubber Mounts 2 Pack – Universal Exhaust Rubbers
$29.81 AUD
Skip to product information
Exhaust Hanger Rubber Mounts 2 Pack – Universal Exhaust Rubbers
Standard delivery is free Australia-wide, including WA and NT, except a $49 flat rate to WA and NT on four bulky items. Express Post is $20 extra on smaller items and isn't available on bulky items.
$29.81 AUD
🎄 Christmas delivery: order by Thu 17 Dec (metro), Tue 15 Dec (NT metro) or Mon 7 Dec (regional). Express Post uses the same cut-off dates.
Product Details
Two heavy duty rubber exhaust hangers, about 11 x 4.5 x 2cm, to replace worn, cracked or missing exhaust mounts and stop a sagging exhaust from rattling.
Rubber exhaust hangers hold the pipe to the car body while soaking up engine vibration. Over time heat and road grime crack them, and the exhaust starts to droop, knock against the floor or rattle over bumps. These replacements are made from dense black rubber with four 12mm holes and slots, which suit the common two-pin hanger style found on many cars, utes and motorbikes. Compare the size and hole spacing with your old hanger before ordering.
What You Get
| Pack | What You Get | Best For |
|---|---|---|
| 2 Pack | 2 black rubber exhaust hangers | Replacing a pair of worn exhaust mounts |
Specifications
| Detail | Specification |
|---|---|
| Material | High-density rubber |
| Length | Approx. 11cm |
| Width | Approx. 4.5cm |
| Thickness | Approx. 2cm |
| Holes | Approx. 12mm |
| Colour | Black |
| Quantity | 2 hangers |
Fitting tip: spray a little soapy water or silicone spray on the hanger pins and the rubber holes. The rubber then slides on and off far more easily.
Why Buy These Exhaust Hangers
- Stops rattles - holds the exhaust firmly in place
- Absorbs vibration - dense rubber cushions engine movement
- Common size - suits many two-pin hanger setups
- Two in a pack - replace a pair at once
- Cheap fix - avoid a workshop call-out for a simple part
Care & Use
Only work on a cold exhaust, with the vehicle safely supported on stands or ramps. Check the hangers when the car is serviced and replace any that are cracked or stretched. If the exhaust pipe or brackets are damaged, have it checked by a mechanic.
Please allow a small measurement tolerance due to manual measurement, and slight colour variation due to different monitor settings.
Where It Gets Used
Home mechanics and car enthusiasts fit them when an exhaust starts knocking, after fitting an aftermarket exhaust, or as part of routine maintenance on older cars.
Workshops and motorbike riders keep spares on hand for quick roadside or garage fixes.
Frequently Asked Questions
Will they fit my car?
They suit many vehicles with two-pin exhaust hangers. Compare the size and hole spacing with your old hanger before ordering.
How big are they?
About 11cm long, 4.5cm wide and 2cm thick, with 12mm holes.
What are they made of?
High-density black rubber.
How many are in the pack?
Two.
Do I need special tools?
A pry bar or hanger removal pliers make it easier, and a little lubricant helps the rubber slide on.
Free Delivery
GST is included in every price. Free delivery Australia-wide. Express Post is available at extra cost. PO Boxes and parcel lockers OK.
These are generic aftermarket exhaust hangers and are not associated with any vehicle manufacturer. Vehicles shown are for illustration only. Check fitment before ordering.
Delivery
Standard delivery is free Australia-wide, including WA and NT, except a $49 flat rate to WA and NT on four bulky items. Express Post is $20 extra on smaller items and isn't available on bulky items, which need a street address. Delivery can take up to 10 business days to regional and remote areas. Delivery times are estimates.
Returns & warranty
You have 30 days from delivery to request a return. Change-of-mind returns must be unused and in the original packaging, and you pay the return postage. If an item is faulty, damaged or wrong, we pay the return postage.
Every product comes with a 3-month warranty, on top of your rights under the Australian Consumer Law.